KERN , Moisture Analyzer MLS 50-3D
Backlit graphic display, digit height 14mm, digit height 14 mm
Display during the drying process:
Unit of the shown result, e.g. moisture [%]
Interim result in moisture-%
Drying process active
Active result display
Active heating profile
Active switch-off criteria
Stability display
Previous drying time
Current temperature
Drying process active
Display after the drying process
End result in moisture-%
Active result display
Drying process has finished
Infrared heater 400 W
Observation window above the sample, useful during initial setting
Balance contains memory for automatic sequence of 100 complete drying programs (92 drying programs with optimised drying characteristics for rapid sample warming and therefore shorter drying times, pre-installed at the factory), 100 users with related authorisations, 1000 drying processes performed and 1000 weighing results (alibi memory)
The last value measured remains on the display until it is replaced by a new measurement
10 sample plates included
Application handbook: There are many practical examples in the user manual
More Product :
Product Overview
|
Kern |
MLS 50-3D |
|
Readout (d) |
0.001 g / 0.01% |
|
Weighing range (Max) |
50 g |
|
Reproducibility, weight of sample 2 g |
0.10% |
|
Reproducibility, weight of sample 10 g |
0.02% |
|
Display after drying (Display can be switched over at any time) |
|
|
Moisture (%) = Moisture content (M) from wet weight (W) |
0-100% |
|
Dry content (%) = Dry weight (D) from (W) |
100-0% |
|
ATRO (%) [(W-D):D] . 100% |
0-999% |
|
Moisture content (M) |
Absolute value in (g) |
|
Temperature range |
40oC – 160oC in step up to 1oC |
|
Drying modes |
Standar drying |
|
Drying in levels |
|
|
Gentle drying |
|
|
Rapid drying |
|
|
Switch off criteria |
Automatic switch off (AUTO 1-5) |
|
Automatic unrestricted switch off (selectable 1-10 mg/ 10-120 s) |
|
|
Time controlled switch off (1 min-99 h 59 min) |
|
|
Manual switch off at the press of a button |
|
|
Recall of measurement |
Interval can be set from 1 sec-10 min (Only when used with printer KERN YKB-01N or PC) |
|
Overall dimensions WxDxH |
206x333x192mm |
PT. SAKA tidak hanya jual Moisture Anlyzer seperti Kern MLS 50-3D tetapi juga menyediakan produk Kern lainnya. Kami menyediakan after sales service sehingga Anda dapat menggunakan produk Moisture Anlyzer Kern dengan nyaman. Kami berharap dengan keberadaan kami sebagai distributor Kern Indonesia, kami dapat membantu menyediakan produk dan informasi yang dibutuhkan pengguna, khususnya pengguna produk Kern di Indonesia. Silahkan hubungi kami untuk informasi lebih lanjut.