HIRAYAMA, HVP-50, 50L HICLAVE WITH VACUUM PUMP FOR DRYING
Prod #HVP50
Top-Loading Autoclave with Fully Automatic Drying cycle using heat and vacuum
*One-touch Lid Interlock System
*Vacuum Pump built-in
Product Overview
Hirayama HVP-50 Upright Autoclave (50 Liter)
Desain hemat-ruang dengan tutup terbuka ke atas.
Siklus pengeringan yang sepenuhnya otomatis untuk beban padat menggunakan panas dan vakum untuk pengeringan yang lebih cepat dan lebih efisien.
Tutup pengaman interlock mencegah pembukaan tutup ketika siklus sedang berlangsung, ruang bertekanan, atau ketika suhu melebihi 97¡C.
Siklus pra-vakum - pompa vakum menghilangkan udara dari ruang ketika mensterilkan padatan seperti ujung gelas dan ujung pipet, sehingga menghilangkan bintik-bintik dingin, dan memastikan sterilisasi yang lebih cepat dan lebih efisien.
Tuas sekali sentuh untuk membuka dan menutup tutup ruang dengan mudah.
Siklus cair untuk media dan agar.
Tampilan proses menunjukkan progres program yang dipilih dan status siklus sterilisasi.
Siklus untuk limbah dan gelas tanpa pengeringan.
Bakteri filter mengurangi kontaminasi ulang.
Sensor penutupan pintu mencegah siklus memulai kecuali pintu ditutup dengan benar.
Ukuran HVP-50: 50 liter, 11,8 "D, 28,0" H.
HVP-50 Specifications
| TEMPERATURE | |
| Operating Range |
105ºC to 135ºC
|
| Display Range |
5ºC to 140ºC
|
| GAUGE PRESSURE | |
| Operating Range (gauge) |
3 to 28.4 psi (0.2 to 2.0 kg/cm² )
|
| TIMER | |
| Sterilization |
1 to 250 minutes
|
| Drying |
1 to 90 minutes
|
| DIMENSIONS | |
| Overall (W x D x H) |
20.1" x 24.8" x 40.9" (51 x 63 x 104) cm
|
| Chamber (Diameter x Height) |
50 liter
11.8" x 28" (30 cm x 71 cm) |
| SAFETY DEVICES |
Temperature- and pressure-sensitive lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, lid-closure detector, over-current detector and circuit breaker with ground fault circuit interrupter.
|
| PROGRAMS | |
| 1. For solids with drying |
Heating and air removal from chamber by vacuum pump (pre-vac) -> Sterilization -> Water and steam exhaust (fast) -> Drying by heat and vacuum -> Completion
|
| 2. For wastes/solids without drying |
Heating -> Pre-vac -> Sterilization -> Steam exhaust (fast) -> Completion
|
| 3. For liquids/agar |
Heating -> Sterilization -> Auto steam exhaust (programmable rates, or ambient cooling w/o steam exhaust) -> Completion
|
| 4. Drying without sterilization |
Drying with heat and vacuum (time programmable) -> Completion(for additional drying after Program #1, if desired)
|
| ACCESSORIES | |
| Stainless steel |
Mesh wire baskets, buckets (pails), and round test tube racks
|
| Factory or field installed |
Data logger
|
| POWER | |
| Source |
120V, 50/60 Hz, single phase (220V/240V available on request)
|
| Consumption |
2000 watts (2000 VA)
|
| SHIPPING WEIGHT |
291 lb (133 kg)
|
Standard Accessories : Heater cover, Flexible drain pipe, Feed water hose, Drain hose, Caster Stopper,
Operation MAnual.
Optional Accessories : SS Wire basket (27Ø x 22H cm)
SS Bucket (27Ø x 22H cm)
SS Dressing Drum (27Ø x 18H cm)